- Remove all door stops
- Push door firmly against wall for guide mark to drill or cut hole
- Verify that electric wires are not in line with cutting area
- Cut hole with drywall saw or 3″ hole saw
- Clean area surrounding hole with cleaner
- Pull tabs off foam tape on Gobbler and place into wall
- Press bezel firmly where foam tape contacts wall
- Clean both, base area on wall and door at contact points
- DO NOT pull dual-lock velcro apart!
- Remove one tab, apply vertically at door corner
- Remove remaining tab and firmly press door against wall
- Nails are included (only if needed) to ensure dual-lock velcro remains secure
